High Light – the ‘true’ full spectrum LED board
Blending three different types of high-efficiency LED, our High Light is the first “true” full-spectrum LED grow board that provides light all the way from 400-800nm, including UVA and Far Red, on one channel.
No other grow light combines high CRI95 with up too 2.5 umol/j efficiency and a complete spectrum powered by a single LED driver. High Lights boost flowering yields and essential oils without the cost or complexity of supplemental grow lights.
This 440w kit is designed for up to a 1.2m x 1.2m and will replace a 630w cmh or 600w hps.
Powered by Meanwell Drivers
All our Highlight Led kits feature High efficiency dimmable Meanwell drivers. Meanwell XLG drivers come with external dimmers as standard dimming all the way down to just 40w (x2) via the dimming knob. They also accept 0-10v controllers with our add on kit, are ip67 rated and come with a full 5 year warranty.
Sunlike CRI 95 LED with its 415nm “UV pump” not only makes this a true full-spectrum board, it provides a small amount of UVA and a noticeable amount of near-UV (400nm-430nm) not found in common “blue pump” LEDs and other single-channel boards.
Nichia’s Optisolis 2700K LED not only has an extremely high CRI of 98, it adds a significant amount of Red (600-650nm), Deep Red (650-700nm) and Far Red (700+nm) light to the board that boosts yields and reduces flowering times.
Nichia’s 757 V3-F1 series, which is claimed to be the most efficient 3030 LED on the market. We chose CRI90 2700K diodes for their added red and quantum efficiency (2.75umol/j at 55% efficiency). They power 70% of the board and lift these boards to an overall efficiency of 2.47 umol/j at 1.5A.
450 mid-power 3030 LEDs per board
300x Nichia 757 V3-F1 CRI90 2700K
90x Nichia “Optisolis” CRI97 2700K
60x Seoul Semiconductor “Sunlike” CRI95 6500K UVA
Whats in the box?
2x Highlight PCB
2x Slate passive heatsink
2x Meanwell XLG-200 driver with prewired power cable.
2x Boxed dimmer.
- 8x wago connectors.
- 4x 30cm prestripped solid core wire.
We offer a 3 year parts replacement warranty on the board and heatsink and a 5 year replacement warranty on the driver.
We pre wire the power cable to comply with LVD safety standards. We also pre strip the solid core wire. All that remains is to bolt the pcb to the heatsink and connect the driver. If you would prefer this kit assembled please choose the assembled option.
If you require an eu power cable please leave a note at the checkout.
|Wattage +/- 5%||
40w - 220w (x2)
|Avarage PPFD in recommended area||600-1000 µmol/m2/s|
2x single boards (200mm (W) x 444mm (L) x 8cm (H) including driver).
1x twin boards (200mm (W) x 800mm (L) x 8cm (H) including driver).
|Coverage veg||Up to 1.5m x 1.5m
|Coverage Flower||Up to 1.2m x 1.2m|
Frequently Asked Questions
Q. How many led watts do I need?
A. We recommend 30-40w per square foot with all our led products. Please see our "which kits for my area" menu for area recommendations.
Q. Do you list at the wall wattage with leds?
A. YES! We sell all our products by the full at the wall power draw. We recommend avoiding any product that lists anything different. (Please allow -/+ 5% due to variances in voltage/temps)
Q. Are your products full spectrum?
A. Yes. All of our diy kits and plug and play lights are full spectrum.
Q. Do leds run hot?
A. Leds run as hot as any other lighting watt for watt. However, due to the higher efficiency of leds, you only need 60-70% of your current HPS wattage to still maintain your light (PPF) output. Therefore reducing the amount of heat in your area. Leds also put a lot of the heat into the heatsink rather than at the canopy allowing you to manage the heat better than traditional lighting.
Q. Which leds should i go for Cobs? Strips? Boards?
A. Area size, budget and height often determine which Leds will better suit your area. We would always recommend sending us and email, to discuss options for your area.
Q. Do you ship outside the EU?
A. Yes, please contact us for a quote, we can offer competitive prices Without 20% EU VAT.
Q. Do you offer a warranty?
A. Yes, all our kits and lighting come with a 3 year warranty. Parts come with a manufacturer warranty, please contact the manufacturer for more details.
Q. Do you have a shop?
A. We have a small showroom we can demonstrate our lighting and are more than happy for customers to come down for a cup of tea and a chat about options. Please contact us to book a site visit. We do not accept customers without previous notice.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
3 YEAR WARRANTY
We are so confident in the quality of our products, we offer a full 3 year warranty for all of our led products and a 5 year driver warranty.
WE SHIP WORLDWIDE
We ship world wide. UK shipping is 6.99 or free when you spend over £200. EU shipping is £14.99 and international shipping starts from as low as £14.99.